java.io
Class ObjectOutputStream

java.lang.Object
  |
  +--java.io.OutputStream
        |
        +--java.io.ObjectOutputStream
All Implemented Interfaces:
DataOutput, ObjectOutput, ObjectStreamConstants
Direct Known Subclasses:
SerializationStream

public class ObjectOutputStream
extends OutputStream
implements ObjectOutput, ObjectStreamConstants

Untamed: An ObjectOutputStream writes primitive data types and graphs of Java objects to an OutputStream. The objects can be read (reconstituted) using an ObjectInputStream. Persistent storage of objects can be accomplished by using a file for the stream. If the stream is a network socket stream, the objects can be reconsituted on another host or in another process.

Only objects that support the java.io.Serializable interface can be written to streams. The class of each serializable object is encoded including the class name and signature of the class, the values of the object's fields and arrays, and the closure of any other objects referenced from the initial objects.

The method writeObject is used to write an object to the stream. Any object, including Strings and arrays, is written with writeObject. Multiple objects or primitives can be written to the stream. The objects must be read back from the corresponding ObjectInputstream with the same types and in the same order as they were written.

Primitive data types can also be written to the stream using the appropriate methods from DataOutput. Strings can also be written using the writeUTF method.

The default serialization mechanism for an object writes the class of the object, the class signature, and the values of all non-transient and non-static fields. References to other objects (except in transient or static fields) cause those objects to be written also. Multiple references to a single object are encoded using a reference sharing mechanism so that graphs of objects can be restored to the same shape as when the original was written.

For example to write an object that can be read by the example in ObjectInputStream:

	FileOutputStream fos = new FileOutputStream("t.tmp");
	ObjectOutputStream oos = new ObjectOutputStream(fos);

	oos.writeInt(12345);
	oos.writeObject("Today");
	oos.writeObject(new Date());

	oos.close();
 

Classes that require special handling during the serialization and deserialization process must implement special methods with these exact signatures:

 private void readObject(java.io.ObjectInputStream stream)
     throws IOException, ClassNotFoundException;
 private void writeObject(java.io.ObjectOutputStream stream)
     throws IOException
 

The writeObject method is responsible for writing the state of the object for its particular class so that the corresponding readObject method can restore it. The method does not need to concern itself with the state belonging to the object's superclasses or subclasses. State is saved by writing the individual fields to the ObjectOutputStream using the writeObject method or by using the methods for primitive data types supported by DataOutput.

Serialization does not write out the fields of any object that does not implement the java.io.Serializable interface. Subclasses of Objects that are not serializable can be serializable. In this case the non-serializable class must have a no-arg constructor to allow its fields to be initialized. In this case it is the responsibility of the subclass to save and restore the state of the non-serializable class. It is frequently the case that the fields of that class are accessible (public, package, or protected) or that there are get and set methods that can be used to restore the state.

Serialization of an object can be prevented by implementing writeObject and readObject methods that throw the NotSerializableException. The exception will be caught by the ObjectOutputStream and abort the serialization process.

Implementing the Externalizable interface allows the object to assume complete control over the contents and format of the object's serialized form. The methods of the Externalizable interface, writeExternal and readExternal, are called to save and restore the objects state. When implemented by a class they can write and read their own state using all of the methods of ObjectOutput and ObjectInput. It is the responsibility of the objects to handle any versioning that occurs.

Primitive data, excluding serializable fields and externalizable data, is written to the ObjectOutputStream in block-data records. A block data record is composed of a header and data. The block data header consists of a marker and the number of bytes to follow the header. Consecutive primitive data writes are merged into one block-data record. The blocking factor used for a block-data record will be 1024 bytes. Each block-data record will be filled up to 1024 bytes, or be written whenever there is a termination of block-data mode. Calls to the ObjectOutputStream methods writeObject, defaultWriteObject and writeFields initially terminate any existing block-data record.

Since:
JDK1.1
Version:
1.132, 02/04/12
Author:
Mike Warres, Roger Riggs
See Also:
java.io.DataOutput, java.io.ObjectInputStream, java.io.Serializable, java.io.Externalizable, Object Serialization Specification, Section 2, Object Output Classes

Field Summary
private  java.io.ObjectOutputStream.BlockDataOutputStream bout
          filter stream for handling block data conversion
private  ObjectStreamClass curDesc
          descriptor for current class (null if in writeExternal())
private  Object curObj
          object currently being serialized
private  java.io.ObjectOutputStream.PutFieldImpl curPut
          current PutField object
private  int depth
          recursion depth
private  boolean enableOverride
          if true, invoke writeObjectOverride() instead of writeObject()
private  boolean enableReplace
          if true, invoke replaceObject()
private  java.io.ObjectOutputStream.HandleTable handles
          obj -> wire handle map
private  byte[] primVals
          buffer for writing primitive field values
private  int protocol
          stream protocol version
private static sun.misc.SoftCache subclassAudits
          cache of subclass security audit results
private  java.io.ObjectOutputStream.ReplaceTable subs
          obj -> replacement obj map
 
Fields inherited from interface java.io.ObjectStreamConstants
baseWireHandle, PROTOCOL_VERSION_1, PROTOCOL_VERSION_2, SC_BLOCK_DATA, SC_EXTERNALIZABLE, SC_SERIALIZABLE, SC_WRITE_METHOD, STREAM_MAGIC, STREAM_VERSION, SUBCLASS_IMPLEMENTATION_PERMISSION, SUBSTITUTION_PERMISSION, TC_ARRAY, TC_BASE, TC_BLOCKDATA, TC_BLOCKDATALONG, TC_CLASS, TC_CLASSDESC, TC_ENDBLOCKDATA, TC_EXCEPTION, TC_LONGSTRING, TC_MAX, TC_NULL, TC_OBJECT, TC_PROXYCLASSDESC, TC_REFERENCE, TC_RESET, TC_STRING
 
Constructor Summary
protected ObjectOutputStream()
          Provide a way for subclasses that are completely reimplementing ObjectOutputStream to not have to allocate private data just used by this implementation of ObjectOutputStream.
  ObjectOutputStream(OutputStream out)
          Enabled: Creates an ObjectOutputStream that writes to the specified OutputStream.
 
Method Summary
protected  void annotateClass(Class cl)
          Subclasses may implement this method to allow class data to be stored in the stream.
protected  void annotateProxyClass(Class cl)
          Subclasses may implement this method to store custom data in the stream along with descriptors for dynamic proxy classes.
private static boolean auditSubclass(Class subcl)
          Performs reflective checks on given subclass to verify that it doesn't override security-sensitive non-final methods.
private  void clear()
          Clears internal data structures.
 void close()
          Enabled: Closes the stream.
private  void defaultWriteFields(Object obj, ObjectStreamClass desc)
          Fetches and writes values of serializable fields of given object to stream.
 void defaultWriteObject()
          Enabled: Write the non-static and non-transient fields of the current class to this stream.
private static void doublesToBytes(double[] src, int srcpos, byte[] dst, int dstpos, int ndoubles)
          Converts specified span of double values into byte values.
protected  void drain()
          Drain any buffered data in ObjectOutputStream.
protected  boolean enableReplaceObject(boolean enable)
          Enable the stream to do replacement of objects in the stream.
private static void floatsToBytes(float[] src, int srcpos, byte[] dst, int dstpos, int nfloats)
          Converts specified span of float values into byte values.
 void flush()
          Enabled: Flushes the stream.
(package private)  int getProtocolVersion()
          Returns protocol version in use.
 java.io.ObjectOutputStream.PutField putFields()
          Enabled: Retrieve the object used to buffer persistent fields to be written to the stream.
protected  Object replaceObject(Object obj)
          This method will allow trusted subclasses of ObjectOutputStream to substitute one object for another during serialization.
 void reset()
          Enabled: Reset will disregard the state of any objects already written to the stream.
 void useProtocolVersion(int version)
          Enabled: Specify stream protocol version to use when writing the stream.
private  void verifySubclass()
          Verifies that this (possibly subclass) instance can be constructed without violating security constraints: the subclass must not override security-sensitive non-final methods, or else the "enableSubclassImplementation" SerializablePermission is checked.
 void write(byte[] buf)
          Enabled: Writes an array of bytes.
 void write(byte[] buf, int off, int len)
          Enabled: Writes a sub array of bytes.
 void write(int val)
          Enabled: Writes a byte.
private  void writeArray(Object array, ObjectStreamClass desc, boolean unshared)
          Writes given array object to stream.
 void writeBoolean(boolean val)
          Enabled: Writes a boolean.
 void writeByte(int val)
          Enabled: Writes an 8 bit byte.
 void writeBytes(String str)
          Enabled: Writes a String as a sequence of bytes.
 void writeChar(int val)
          Enabled: Writes a 16 bit char.
 void writeChars(String str)
          Enabled: Writes a String as a sequence of chars.
private  void writeClass(Class cl, boolean unshared)
          Writes representation of given class to stream.
private  void writeClassDesc(ObjectStreamClass desc, boolean unshared)
          Writes representation of given class descriptor to stream.
protected  void writeClassDescriptor(ObjectStreamClass desc)
          Write the specified class descriptor to the ObjectOutputStream.
 void writeDouble(double val)
          Enabled: Writes a 64 bit double.
private  void writeExternalData(Externalizable obj)
          Writes externalizable data of given object by invoking its writeExternal() method.
private  void writeFatalException(IOException ex)
          Attempts to write to stream fatal IOException that has caused serialization to abort.
 void writeFields()
          Enabled: Write the buffered fields to the stream.
 void writeFloat(float val)
          Enabled: Writes a 32 bit float.
private  void writeHandle(int handle)
          Writes given object handle to stream.
 void writeInt(int val)
          Enabled: Writes a 32 bit int.
 void writeLong(long val)
          Enabled: Writes a 64 bit long.
private  void writeNonProxyDesc(ObjectStreamClass desc, boolean unshared)
          Writes class descriptor representing a standard (i.e., not a dynamic proxy) class to stream.
private  void writeNull()
          Writes null code to stream.
 void writeObject(Object obj)
          Enabled: Write the specified object to the ObjectOutputStream.
private  void writeObject0(Object obj, boolean unshared)
          Underlying writeObject/writeUnshared implementation.
protected  void writeObjectOverride(Object obj)
          Method used by subclasses to override the default writeObject method.
private  void writeOrdinaryObject(Object obj, ObjectStreamClass desc, boolean unshared)
          Writes representation of a "ordinary" (i.e., not a String, Class, ObjectStreamClass or array) serializable object to the stream.
private  void writeProxyDesc(ObjectStreamClass desc, boolean unshared)
          Writes class descriptor representing a dynamic proxy class to stream.
private  void writeSerialData(Object obj, ObjectStreamClass desc)
          Writes instance data for each serializable class of given object, from superclass to subclass.
 void writeShort(int val)
          Enabled: Writes a 16 bit short.
protected  void writeStreamHeader()
          The writeStreamHeader method is provided so subclasses can append or prepend their own header to the stream.
private  void writeString(String str, boolean unshared)
          Writes given string to stream, using standard or long UTF format depending on string length.
(package private)  void writeTypeString(String str)
          Writes string without allowing it to be replaced in stream.
 void writeUnshared(Object obj)
          Enabled: Writes an "unshared" object to the ObjectOutputStream.
 void writeUTF(String str)
          Enabled: Primitive data write of this String in UTF format.
 
Methods inherited from class java.lang.Object
clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait
 
Methods inherited from interface java.io.DataOutput
writeWholeNum
 

Field Detail

subclassAudits

private static final sun.misc.SoftCache subclassAudits
cache of subclass security audit results


bout

private final java.io.ObjectOutputStream.BlockDataOutputStream bout
filter stream for handling block data conversion


handles

private final java.io.ObjectOutputStream.HandleTable handles
obj -> wire handle map


subs

private final java.io.ObjectOutputStream.ReplaceTable subs
obj -> replacement obj map


protocol

private int protocol
stream protocol version


depth

private int depth
recursion depth


primVals

private byte[] primVals
buffer for writing primitive field values


enableOverride

private final boolean enableOverride
if true, invoke writeObjectOverride() instead of writeObject()


enableReplace

private boolean enableReplace
if true, invoke replaceObject()


curObj

private Object curObj
object currently being serialized


curDesc

private ObjectStreamClass curDesc
descriptor for current class (null if in writeExternal())


curPut

private java.io.ObjectOutputStream.PutFieldImpl curPut
current PutField object

Constructor Detail

ObjectOutputStream

public ObjectOutputStream(OutputStream out)
                   throws IOException
Enabled: Creates an ObjectOutputStream that writes to the specified OutputStream. This constructor writes the serialization stream header to the underlying stream; callers may wish to flush the stream immediately to ensure that constructors for receiving ObjectInputStreams will not block when reading the header.

If a security manager is installed, this constructor will check for the "enableSubclassImplementation" SerializablePermission when invoked directly or indirectly by the constructor of a subclass which overrides the ObjectOutputStream.putFields or ObjectOutputStream.writeUnshared methods.

Parameters:
out - output stream to write to
Throws:
IOException - if an I/O error occurs while writing stream header
SecurityException - if untrusted subclass illegally overrides security-sensitive methods
NullPointerException - if out is null
See Also:
ObjectOutputStream(), putFields(), ObjectInputStream.ObjectInputStream(InputStream)

ObjectOutputStream

protected ObjectOutputStream()
                      throws IOException,
                             SecurityException
Provide a way for subclasses that are completely reimplementing ObjectOutputStream to not have to allocate private data just used by this implementation of ObjectOutputStream.

If there is a security manager installed, this method first calls the security manager's checkPermission method with a SerializablePermission("enableSubclassImplementation") permission to ensure it's ok to enable subclassing.

Throws:
SecurityException - if a security manager exists and its checkPermission method denies enabling subclassing.
IOException
See Also:
SecurityManager.checkPermission(java.security.Permission), java.io.SerializablePermission
Method Detail

useProtocolVersion

public void useProtocolVersion(int version)
                        throws IOException
Enabled: Specify stream protocol version to use when writing the stream.

This routine provides a hook to enable the current version of Serialization to write in a format that is backwards compatible to a previous version of the stream format.

Every effort will be made to avoid introducing additional backwards incompatibilities; however, sometimes there is no other alternative.

Parameters:
version - use ProtocolVersion from java.io.ObjectStreamConstants.
Throws:
IllegalStateException - if called after any objects have been serialized.
IllegalArgumentException - if invalid version is passed in.
IOException - if I/O errors occur
Since:
1.2
See Also:
java.io.ObjectStreamConstants#PROTOCOL_VERSION_1, java.io.ObjectStreamConstants#PROTOCOL_VERSION_2

writeObject

public final void writeObject(Object obj)
                       throws IOException
Enabled: Write the specified object to the ObjectOutputStream. The class of the object, the signature of the class, and the values of the non-transient and non-static fields of the class and all of its supertypes are written. Default serialization for a class can be overridden using the writeObject and the readObject methods. Objects referenced by this object are written transitively so that a complete equivalent graph of objects can be reconstructed by an ObjectInputStream.

Exceptions are thrown for problems with the OutputStream and for classes that should not be serialized. All exceptions are fatal to the OutputStream, which is left in an indeterminate state, and it is up to the caller to ignore or recover the stream state.

Specified by:
writeObject in interface ObjectOutput
Parameters:
obj - the object to be written
Throws:
InvalidClassException - Something is wrong with a class used by serialization.
NotSerializableException - Some object to be serialized does not implement the java.io.Serializable interface.
IOException - Any exception thrown by the underlying OutputStream.

writeObjectOverride

protected void writeObjectOverride(Object obj)
                            throws IOException
Method used by subclasses to override the default writeObject method. This method is called by trusted subclasses of ObjectInputStream that constructed ObjectInputStream using the protected no-arg constructor. The subclass is expected to provide an override method with the modifier "final".

Parameters:
obj - object to be written to the underlying stream
Throws:
IOException - if there are I/O errors while writing to the underlying stream
Since:
1.2
See Also:
ObjectOutputStream(), writeObject(Object)

writeUnshared

public void writeUnshared(Object obj)
                   throws IOException
Enabled: Writes an "unshared" object to the ObjectOutputStream. This method is identical to writeObject, except that it always writes the given object as a new, unique object in the stream (as opposed to a back-reference pointing to a previously serialized instance). Specifically: While writing an object via writeUnshared does not in itself guarantee a unique reference to the object when it is deserialized, it allows a single object to be defined multiple times in a stream, so that multiple calls to readUnshared by the receiver will not conflict. Note that the rules described above only apply to the base-level object written with writeUnshared, and not to any transitively referenced sub-objects in the object graph to be serialized.

ObjectOutputStream subclasses which override this method can only be constructed in security contexts possessing the "enableSubclassImplementation" SerializablePermission; any attempt to instantiate such a subclass without this permission will cause a SecurityException to be thrown.

Parameters:
obj - object to write to stream
Throws:
NotSerializableException - if an object in the graph to be serialized does not implement the Serializable interface
InvalidClassException - if a problem exists with the class of an object to be serialized
IOException - if an I/O error occurs during serialization

defaultWriteObject

public void defaultWriteObject()
                        throws IOException
Enabled: Write the non-static and non-transient fields of the current class to this stream. This may only be called from the writeObject method of the class being serialized. It will throw the NotActiveException if it is called otherwise.

Throws:
IOException - if I/O errors occur while writing to the underlying OutputStream

putFields

public java.io.ObjectOutputStream.PutField putFields()
                                              throws IOException
Enabled: Retrieve the object used to buffer persistent fields to be written to the stream. The fields will be written to the stream when writeFields method is called.

Returns:
an instance of the class Putfield that holds the serializable fields
Throws:
IOException - if I/O errors occur
Since:
1.2

writeFields

public void writeFields()
                 throws IOException
Enabled: Write the buffered fields to the stream.

Throws:
IOException - if I/O errors occur while writing to the underlying stream
NotActiveException - Called when a classes writeObject method was not called to write the state of the object.
Since:
1.2

reset

public void reset()
           throws IOException
Enabled: Reset will disregard the state of any objects already written to the stream. The state is reset to be the same as a new ObjectOutputStream. The current point in the stream is marked as reset so the corresponding ObjectInputStream will be reset at the same point. Objects previously written to the stream will not be refered to as already being in the stream. They will be written to the stream again.

Throws:
IOException - if reset() is invoked while serializing an object.

annotateClass

protected void annotateClass(Class cl)
                      throws IOException
Subclasses may implement this method to allow class data to be stored in the stream. By default this method does nothing. The corresponding method in ObjectInputStream is resolveClass. This method is called exactly once for each unique class in the stream. The class name and signature will have already been written to the stream. This method may make free use of the ObjectOutputStream to save any representation of the class it deems suitable (for example, the bytes of the class file). The resolveClass method in the corresponding subclass of ObjectInputStream must read and use any data or objects written by annotateClass.

Parameters:
cl - the class to annotate custom data for
Throws:
IOException - Any exception thrown by the underlying OutputStream.

annotateProxyClass

protected void annotateProxyClass(Class cl)
                           throws IOException
Subclasses may implement this method to store custom data in the stream along with descriptors for dynamic proxy classes.

This method is called exactly once for each unique proxy class descriptor in the stream. The default implementation of this method in ObjectOutputStream does nothing.

The corresponding method in ObjectInputStream is resolveProxyClass. For a given subclass of ObjectOutputStream that overrides this method, the resolveProxyClass method in the corresponding subclass of ObjectInputStream must read any data or objects writtem by annotateProxyClass.

Parameters:
cl - the proxy class to annotate custom data for
Throws:
IOException - any exception thrown by the underlying OutputStream
Since:
1.3
See Also:
ObjectInputStream.resolveProxyClass(String[])

replaceObject

protected Object replaceObject(Object obj)
                        throws IOException
This method will allow trusted subclasses of ObjectOutputStream to substitute one object for another during serialization. Replacing objects is disabled until enableReplaceObject is called. The enableReplaceObject method checks that the stream requesting to do replacment can be trusted. The first occurrence of each object written into the serialization stream is passed to replaceObject. Subsequent references to the object are replaced by the object returned by the original call to replaceObject. To ensure that the private state of objects is not unintentionally exposed, only trusted streams may use replaceObject.

The ObjectOutputStream.writeObject method takes a parameter of type Object (as opposed to type Serializable) to allow for cases where non-serializable objects are replaced by serializable ones.

When a subclass is replacing objects it must insure that either a complementary substitution must be made during deserialization or that the substituted object is compatible with every field where the reference will be stored. Objects whose type is not a subclass of the type of the field or array element abort the serialization by raising an exception and the object is not be stored.

This method is called only once when each object is first encountered. All subsequent references to the object will be redirected to the new object. This method should return the object to be substituted or the original object.

Null can be returned as the object to be substituted, but may cause NullReferenceException in classes that contain references to the original object since they may be expecting an object instead of null.

Parameters:
obj - the object to be replaced
Returns:
the alternate object that replaced the specified one
Throws:
IOException - Any exception thrown by the underlying OutputStream.

enableReplaceObject

protected boolean enableReplaceObject(boolean enable)
                               throws SecurityException
Enable the stream to do replacement of objects in the stream. When enabled, the replaceObject method is called for every object being serialized.

If enable is true, and there is a security manager installed, this method first calls the security manager's checkPermission method with a SerializablePermission("enableSubstitution") permission to ensure it's ok to enable the stream to do replacement of objects in the stream.

Parameters:
enable - boolean parameter to enable replacement of objects
Returns:
the previous setting before this method was invoked
Throws:
SecurityException - if a security manager exists and its checkPermission method denies enabling the stream to do replacement of objects in the stream.
See Also:
SecurityManager.checkPermission(java.security.Permission), java.io.SerializablePermission

writeStreamHeader

protected void writeStreamHeader()
                          throws IOException
The writeStreamHeader method is provided so subclasses can append or prepend their own header to the stream. It writes the magic number and version to the stream.

Throws:
IOException - if I/O errors occur while writing to the underlying stream

writeClassDescriptor

protected void writeClassDescriptor(ObjectStreamClass desc)
                             throws IOException
Write the specified class descriptor to the ObjectOutputStream. Class descriptors are used to identify the classes of objects written to the stream. Subclasses of ObjectOutputStream may override this method to customize the way in which class descriptors are written to the serialization stream. The corresponding method in ObjectInputStream, readClassDescriptor, should then be overridden to reconstitute the class descriptor from its custom stream representation. By default, this method writes class descriptors according to the format defined in the Object Serialization specification.

Note that this method will only be called if the ObjectOutputStream is not using the old serialization stream format (set by calling ObjectOutputStream's useProtocolVersion method). If this serialization stream is using the old format (PROTOCOL_VERSION_1), the class descriptor will be written internally in a manner that cannot be overridden or customized.

Parameters:
desc - class descriptor to write to the stream
Throws:
IOException - If an I/O error has occurred.
Since:
1.3
See Also:
java.io.ObjectInputStream#readClassDescriptor(), useProtocolVersion(int), java.io.ObjectStreamConstants#PROTOCOL_VERSION_1

write

public void write(int val)
           throws IOException
Enabled: Writes a byte. This method will block until the byte is actually written.

Specified by:
write in interface ObjectOutput
Specified by:
write in class OutputStream
Parameters:
val - the byte to be written to the stream
Throws:
IOException - If an I/O error has occurred.

write

public void write(byte[] buf)
           throws IOException
Enabled: Writes an array of bytes. This method will block until the bytes are actually written.

Specified by:
write in interface ObjectOutput
Overrides:
write in class OutputStream
Parameters:
buf - the data to be written
Throws:
IOException - If an I/O error has occurred.

write

public void write(byte[] buf,
                  int off,
                  int len)
           throws IOException
Enabled: Writes a sub array of bytes.

Specified by:
write in interface ObjectOutput
Overrides:
write in class OutputStream
Parameters:
buf - the data to be written
off - the start offset in the data
len - the number of bytes that are written
Throws:
IOException - If an I/O error has occurred.

flush

public void flush()
           throws IOException
Enabled: Flushes the stream. This will write any buffered output bytes and flush through to the underlying stream.

Specified by:
flush in interface ObjectOutput
Overrides:
flush in class OutputStream
Throws:
IOException - If an I/O error has occurred.

drain

protected void drain()
              throws IOException
Drain any buffered data in ObjectOutputStream. Similar to flush but does not propagate the flush to the underlying stream.

Throws:
IOException - if I/O errors occur while writing to the underlying stream

close

public void close()
           throws IOException
Enabled: Closes the stream. This method must be called to release any resources associated with the stream.

Specified by:
close in interface ObjectOutput
Overrides:
close in class OutputStream
Throws:
IOException - If an I/O error has occurred.

writeBoolean

public void writeBoolean(boolean val)
                  throws IOException
Enabled: Writes a boolean.

Specified by:
writeBoolean in interface DataOutput
Parameters:
val - the boolean to be written
Throws:
IOException - if I/O errors occur while writing to the underlying stream

writeByte

public void writeByte(int val)
               throws IOException
Enabled: Writes an 8 bit byte.

Specified by:
writeByte in interface DataOutput
Parameters:
val - the byte value to be written
Throws:
IOException - if I/O errors occur while writing to the underlying stream

writeShort

public void writeShort(int val)
                throws IOException
Enabled: Writes a 16 bit short.

Specified by:
writeShort in interface DataOutput
Parameters:
val - the short value to be written
Throws:
IOException - if I/O errors occur while writing to the underlying stream

writeChar

public void writeChar(int val)
               throws IOException
Enabled: Writes a 16 bit char.

Specified by:
writeChar in interface DataOutput
Parameters:
val - the char value to be written
Throws:
IOException - if I/O errors occur while writing to the underlying stream

writeInt

public void writeInt(int val)
              throws IOException
Enabled: Writes a 32 bit int.

Specified by:
writeInt in interface DataOutput
Parameters:
val - the integer value to be written
Throws:
IOException - if I/O errors occur while writing to the underlying stream

writeLong

public void writeLong(long val)
               throws IOException
Enabled: Writes a 64 bit long.

Specified by:
writeLong in interface DataOutput
Parameters:
val - the long value to be written
Throws:
IOException - if I/O errors occur while writing to the underlying stream

writeFloat

public void writeFloat(float val)
                throws IOException
Enabled: Writes a 32 bit float.

Specified by:
writeFloat in interface DataOutput
Parameters:
val - the float value to be written
Throws:
IOException - if I/O errors occur while writing to the underlying stream

writeDouble

public void writeDouble(double val)
                 throws IOException
Enabled: Writes a 64 bit double.

Specified by:
writeDouble in interface DataOutput
Parameters:
val - the double value to be written
Throws:
IOException - if I/O errors occur while writing to the underlying stream

writeBytes

public void writeBytes(String str)
                throws IOException
Enabled: Writes a String as a sequence of bytes.

Specified by:
writeBytes in interface DataOutput
Parameters:
str - the String of bytes to be written
Throws:
IOException - if I/O errors occur while writing to the underlying stream

writeChars

public void writeChars(String str)
                throws IOException
Enabled: Writes a String as a sequence of chars.

Specified by:
writeChars in interface DataOutput
Parameters:
str - the String of chars to be written
Throws:
IOException - if I/O errors occur while writing to the underlying stream

writeUTF

public void writeUTF(String str)
              throws IOException
Enabled: Primitive data write of this String in UTF format. Note that there is a significant difference between writing a String into the stream as primitive data or as an Object. A String instance written by writeObject is written into the stream as a String initially. Future writeObject() calls write references to the string into the stream.

Specified by:
writeUTF in interface DataOutput
Parameters:
str - the String in UTF format
Throws:
IOException - if I/O errors occur while writing to the underlying stream

getProtocolVersion

int getProtocolVersion()
Returns protocol version in use.


writeTypeString

void writeTypeString(String str)
               throws IOException
Writes string without allowing it to be replaced in stream. Used by ObjectStreamClass to write class descriptor type strings.

IOException

verifySubclass

private void verifySubclass()
Verifies that this (possibly subclass) instance can be constructed without violating security constraints: the subclass must not override security-sensitive non-final methods, or else the "enableSubclassImplementation" SerializablePermission is checked.


auditSubclass

private static boolean auditSubclass(Class subcl)
Performs reflective checks on given subclass to verify that it doesn't override security-sensitive non-final methods. Returns true if subclass is "safe", false otherwise.


clear

private void clear()
Clears internal data structures.


writeObject0

private void writeObject0(Object obj,
                          boolean unshared)
                   throws IOException
Underlying writeObject/writeUnshared implementation.

IOException

writeNull

private void writeNull()
                throws IOException
Writes null code to stream.

IOException

writeHandle

private void writeHandle(int handle)
                  throws IOException
Writes given object handle to stream.

IOException

writeClass

private void writeClass(Class cl,
                        boolean unshared)
                 throws IOException
Writes representation of given class to stream.

IOException

writeClassDesc

private void writeClassDesc(ObjectStreamClass desc,
                            boolean unshared)
                     throws IOException
Writes representation of given class descriptor to stream.

IOException

writeProxyDesc

private void writeProxyDesc(ObjectStreamClass desc,
                            boolean unshared)
                     throws IOException
Writes class descriptor representing a dynamic proxy class to stream.

IOException

writeNonProxyDesc

private void writeNonProxyDesc(ObjectStreamClass desc,
                               boolean unshared)
                        throws IOException
Writes class descriptor representing a standard (i.e., not a dynamic proxy) class to stream.

IOException

writeString

private void writeString(String str,
                         boolean unshared)
                  throws IOException
Writes given string to stream, using standard or long UTF format depending on string length.

IOException

writeArray

private void writeArray(Object array,
                        ObjectStreamClass desc,
                        boolean unshared)
                 throws IOException
Writes given array object to stream.

IOException

writeOrdinaryObject

private void writeOrdinaryObject(Object obj,
                                 ObjectStreamClass desc,
                                 boolean unshared)
                          throws IOException
Writes representation of a "ordinary" (i.e., not a String, Class, ObjectStreamClass or array) serializable object to the stream.

IOException

writeExternalData

private void writeExternalData(Externalizable obj)
                        throws IOException
Writes externalizable data of given object by invoking its writeExternal() method.

IOException

writeSerialData

private void writeSerialData(Object obj,
                             ObjectStreamClass desc)
                      throws IOException
Writes instance data for each serializable class of given object, from superclass to subclass.

IOException

defaultWriteFields

private void defaultWriteFields(Object obj,
                                ObjectStreamClass desc)
                         throws IOException
Fetches and writes values of serializable fields of given object to stream. The given class descriptor specifies which field values to write, and in which order they should be written.

IOException

writeFatalException

private void writeFatalException(IOException ex)
                          throws IOException
Attempts to write to stream fatal IOException that has caused serialization to abort.

IOException

floatsToBytes

private static void floatsToBytes(float[] src,
                                  int srcpos,
                                  byte[] dst,
                                  int dstpos,
                                  int nfloats)
Converts specified span of float values into byte values.


doublesToBytes

private static void doublesToBytes(double[] src,
                                   int srcpos,
                                   byte[] dst,
                                   int dstpos,
                                   int ndoubles)
Converts specified span of double values into byte values.



comments?